A case unpacker is the machine that turns flat, unformed cartons into open, ready-to-fill cases at the start of an end-of-line packing process. As a China Case Unpacker Manufacturer, Jiaxing K-Line Machinery Co., Ltd. supplies a Servo-Driven Low-Speed Case Unpacker that uses vertical servo forming, handles cartons from L280-500 x W160-400 x H150-400mm, and forms 5-15 cases per minute. This article covers what the machine does, the specifications that matter when you compare suppliers, and how it fits into a wider packaging line.
Servo-Driven Low-Speed Case Unpacker at a Glance
The short answer for buyers: this Case Unpacker is built for low-speed carton forming where changeover stability matters. Jiaxing K-Line Machinery Co., Ltd. lists it under Auxiliary Equipment, and the specification table in the next section summarizes the core figures published for the machine.
Technical Specifications Buyers Should Check First
Before you request a quote from any China Case Unpacker Manufacturer, confirm that the published figures match your carton and your utilities. The table below lists the specifications Jiaxing K-Line Machinery Co., Ltd. publishes for this model.
| Item |
Published Specification |
| Forming method |
Vertical servo forming |
| Power supply |
220V 50Hz, 1.9KW |
| Air pressure |
5-6kg/cm2 |
| Suitable carton size |
L280-500 x W160-400 x H150-400mm |
| Forming speed |
5-15 cases/min |
| Magazine capacity |
Approximately 50 unformed cartons |
| Alarm functions |
No-tape alarm and no-carton alarm |
| Changeover control |
Suction and pushing positions switched by one key on the touchscreen |
How Vertical Servo Forming Supports Stable Operation
The unpacker relies on servo motion data that can be controlled and stored, which is what makes position changes repeatable. Jiaxing K-Line Machinery Co., Ltd. states that this controllability reduces manual adjustment steps and improves stability after a changeover. In practice, the operating cycle breaks into four stages.
- Load the magazine. Operators place about 50 unformed cartons in the magazine.
- Form the case. The vertical servo forming action opens each carton for the next station.
- Monitor supply. The no-tape alarm and no-carton alarm warn the operator when consumables run out.
- Switch format. For a new carton size, suction and pushing positions change with one key on the touchscreen.
Output Planning: What 5-15 Cases per Minute Means
A forming speed of 5-15 cases per minute defines this machine as a low-speed Case Unpacker, so it suits lines where carton demand is moderate rather than extreme. The figures below are simple arithmetic based on the published speed and magazine capacity, assuming continuous running at the rated speed.
300cases per hour at 5 cases/min
600cases per hour at 10 cases/min
900cases per hour at 15 cases/min
| Forming Speed |
Cases per Hour |
Time to Empty a 50-Carton Magazine |
| 5 cases/min |
300 |
About 10 minutes |
| 10 cases/min |
600 |
About 5 minutes |
| 15 cases/min |
900 |
About 3.3 minutes |
This is why the magazine and the alarms matter. At the top speed, the operator reloads roughly every three minutes, and the no-carton alarm prevents a silent stop. Jiaxing K-Line Machinery Co., Ltd. builds both functions into the machine so the reloading rhythm is visible to the operator.
Changeover: What Stays Manual and What Is One Touch
Changeover is where many buyers lose time, so it helps to know exactly which steps are manual. According to Jiaxing K-Line Machinery Co., Ltd., the standard model combines manual adjustment of some parts with touchscreen switching of the servo positions.
Adjusted Manually
- Magazine
- Carton stopper
- Discharge width
- Height
Switched with One Touch
- Suction position
- Pushing position
If your plant changes carton sizes often and wants less manual work, the manufacturer notes that fully servo-driven changeover models can also be customized according to customer requirements. This is a practical reason to discuss your size list with Jiaxing K-Line Machinery Co., Ltd. before ordering.
Where the Case Unpacker Fits in a Complete Packaging Line
A Case Unpacker rarely works alone. Jiaxing K-Line Machinery Co., Ltd. focuses on vertical automatic weighing packaging machines and supporting conveying systems, and it can undertake integrated design and turnkey implementation of full-plant automated packaging systems. That means the unpacker can be planned together with the machines around it. The listed products below come from the same company catalog.
Vertical Packaging Machine Automatic Premade Pouch Packing Machine Multi-head Weigher Checkweigher Metal Detection Machine X-ray Inspection Machine Carton Sealing Machine Output Conveyor Coding Machine Case Packing Robot Palletizing Robot
The company's products are applied in confectionery, puffed food, biscuits, powder materials, nuts, frozen food, agricultural and sideline products, chemical materials, and hardware products. Its catalog also includes back-end packing and sorting equipment, so a buyer can source the case forming station and the downstream equipment from one supplier.
Supplier Evaluation Checklist for Overseas Buyers
When you compare a China Case Unpacker Manufacturer against other suppliers, use the checklist below. The right-hand column shows what Jiaxing K-Line Machinery Co., Ltd. publishes for each point.
| What to Verify |
Published by the Company |
| Technical team experience |
Core team engaged in automated packaging for nearly two decades |
| Engineering supervision |
R&D, design, and manufacturing supervised by senior technical staff |
| Certification |
CE certificate, test draft report, invention patent, and utility model patents |
| Customization |
OEM supply, customized non-standard machinery, custom changeover models |
| After-sales |
Standardized full-cycle after-sales service system |
| Location |
Xiuzhou District, Jiaxing City, near Shanghai, Hangzhou, Ningbo, and Suzhou |
The company describes its market position as international quality, Taiwan technology, and mainland pricing. For your own evaluation, send your carton dimensions, target cases per minute, and local voltage to info@mainfill.com or call +86-573-82788180 so the engineers can confirm fit against the published ranges.
Case Unpacker FAQ
How many cases per minute can this Case Unpacker form?
The Servo-Driven Low-Speed Case Unpacker from Jiaxing K-Line Machinery Co., Ltd. has a forming speed of 5-15 cases per minute.
What carton sizes does it handle?
It is suitable for cartons from L280-500 x W160-400 x H150-400mm. Check that your carton falls inside all three ranges.
What power and air supply does it need?
The machine runs on 220V 50Hz with a power of 1.9KW and needs an air pressure of 5-6kg/cm2.
How many cartons can the magazine hold?
The magazine holds approximately 50 unformed cartons.
Does the machine warn me when tape or cartons run out?
Yes. It is equipped with a no-tape alarm and a no-carton alarm.
Which parts need manual adjustment during a size change?
The magazine, carton stopper, discharge width, and height are adjusted manually. Suction and pushing positions are switched with one touch on the touchscreen.
Can I order a fully servo-driven changeover version?
Yes. Fully servo-driven changeover models can be customized according to customer requirements. Contact the company with your carton list.
Is this Case Unpacker suitable for high-speed lines?
It is designed as a low-speed model with a top forming speed of 15 cases per minute. Lines that need a higher rate should discuss requirements with the manufacturer first.
Can the supplier provide OEM service?
Jiaxing K-Line Machinery Co., Ltd. positions itself as an OEM Case Unpacker manufacturer and custom Case Unpacker supplier for global buyers.
How do I request a quotation?
Email info@mainfill.com or call +86-573-82788180 with your carton size, target speed, and voltage requirements.