Jiaxing K-Line Machinery Co., Ltd. builds the Inclined Conveyor Manufacturer line at our Jiaxing factory for packaging plants that need a predictable, washable link between product storage and weighing or filling equipment. The conveyor carries product on a food-grade PP mesh belt with modular baffles, so it suits granular, snack, frozen and agricultural products that must be lifted without rollback or excessive breakage.
Where the Inclined Conveyor Fits
The inclined belt conveyor is normally installed between an upstream bulk hopper, big bag or feeding cart, and a downstream multi-head weigher or vertical packaging machine. It is a volume-based transfer stage, not a weighing stage, so its job is to deliver a continuous and even flow at the correct height for the next machine.
- Snack and food lines: puffed food, biscuits, nuts, confectionery and similar fragile or irregular pieces.
- Frozen and agricultural products: vegetables, kernels, dried fruit and other items that may carry surface moisture.
- Chemical and hardware materials: granules and small parts that need a clean, controlled feed into the packaging process.
Standard Configuration and Technical Basis
The machine is supplied as a compact incline unit with 0.75 kW drive power and a standard throughput range of 1–3 m³/h. Baffle arrangement and lifting height are selected around the product and the filling inlet height.
| Parameter |
Standard |
Configuration Note |
| Belt |
Food-grade PP mesh belt |
Resistant to high and low temperatures; washable with clean water |
| Capacity |
1–3 m³/h |
Depends on material density and lifting height |
| Drive power |
0.75 kW |
Selected with load, height and incline angle |
| Baffle height |
60 mm or 100 mm |
Optional, based on product size |
| Baffle spacing |
203.2 mm |
Customizable for larger or smaller pieces |
| Lifting height |
Set by application |
Customized to the weigher or packaging machine inlet height |
Because the belt is open mesh, surface moisture and small fines can fall away during the incline, which keeps the belt cleaner between product runs.
Range and Sibling Equipment
The Inclined Conveyor belongs to our Material Feeding and Conveying Equipment range, which also includes Z-type Elevators, Screw Elevators, Single Bucket Elevators and Vacuum Loaders. For a project that needs vertical lift in a compact footprint, a Z-type or screw elevator can be a better fit; for gentle, continuous elevation of free-flowing product, the inclined mesh belt conveyor is usually the simplest machine to install and maintain.
Each machine in this range is selected by material behavior, height difference and required throughput, so the transfer system is designed as one platform rather than a collection of disconnected conveyors.
Engineering and Integration Value
The conveyor is delivered as a line-ready interface: its control circuit and level sensors allow automatic start and stop based on downstream demand, and it is normally paired with a Multi-head Weigher and Vertical Packaging Machine to form a complete quantitative packaging system. When we quote the conveyor with those machines, the transfer height, bracket position and control interlocks are designed together so the system works as one unit.
The baffles hold an even bed of product, which gives the downstream weigher a steady supply. Our engineering team also supports integration with inspection equipment and auxiliary machines when the packaging line requires more than filling only.
Quality, Maintenance and Support
All R&D, design and manufacturing stages are supervised by senior technical staff from our core team, which has worked in automated packaging for nearly two decades. Our certified records include CE test draft reports and utility model patents, and the proposal defines the rated capacity, lifting height and interface point so commissioning is measured against the agreed working point.
For food plants, the inclined conveyor is designed for easy assembly and disassembly, and the PP mesh belt can be washed with clean water. As a China factory with a standardized full-cycle after-sales service system, we support the conveyor as part of the complete line, and the same engineering team that prepares the line design handles service coordination.
Information We Use to Configure Your Solution
To prepare a proposal we need the transfer height, product behavior and line speed target. For a complete conveyor quote, send the following:
- Product type, bulk density, particle size and any tendency to bridge or flow freely.
- Inlet height and discharge height, or the model and inlet height of the weigher or packaging machine.
- Target capacity in kg/h or m³/h, plus maximum surge from upstream equipment.
- Available floor space, incline angle constraints and clearance above the line.
- Washdown frequency and whether the belt runs near hot, chilled or frozen product.
- Electrical supply voltage and frequency, plus control preference for standalone or PLC-integrated operation.
We use that data to set belt width, baffle configuration, lifting height and drive selection before confirming the commercial offer.
Inclined Conveyor Manufacturer FAQs
- Can the inclined conveyor feed a multi-head weigher directly? Yes, this is the standard arrangement. The conveyor discharges at the weigher inlet height and its level sensor controls the feeding cycle automatically.
- What capacity does the standard conveyor reach? The standard machine is designed for 1–3 m³/h. Higher or lower throughput is assessed by material density and lifting height.
- Is the belt suitable for wet or frozen products? The food-grade PP mesh belt is washable and resistant to high and low temperatures, but the operating limit depends on product temperature, moisture content and belt selection; we confirm it in the proposal.
- Can baffle height and spacing be changed for larger products? Baffle heights of 60 mm and 100 mm are available, and the 203.2 mm spacing can be adjusted for piece size.
- Do you supply just the conveyor or the whole system? We supply both. The conveyor can be a standalone machine or part of a full line with weighers, packaging machines, inspection equipment and auxiliary equipment.